Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY (for LED Headlight): REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. REMOVE DECK FLOOR BOX RH Removal

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE Removal

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE FRONT BUMPER ASSEMBLY

Removal

9. REMOVE FRONT FENDER SIDE PANEL PROTECTOR Removal

10. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the bolt and 2 screws.





(b) Disengage the claw.

(c) Disengage the clamp.





(d) Disconnect each connector and remove the headlight assembly.