Microphone Circuit between Microphone and Multi-display
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM (w/o Navigation System with Multi-display): Microphone Circuit between Microphone and Multi-display
- Microphone Circuit between Microphone and Multi-display
DESCRIPTION
This circuit sends a microphone signal from the roof console box (telephone microphone assembly) to the display and navigation module display.
It also supplies power from the display and navigation module display to the roof console box (telephone microphone assembly).
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (DISPLAY AND NAVIGATION MODULE DISPLAY - ROOF CONSOLE BOX ASSEMBLY)
(a) Disconnect the display and navigation module display connector.
(b) Disconnect the roof console box assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. INSPECT DISPLAY AND NAVIGATION MODULE DISPLAY
(a) Reconnect the display and navigation module display connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Removal
OK -- Continue to next step.
3. INSPECT ROOF CONSOLE BOX ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE TELEPHONE MICROPHONE ASSEMBLY
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table
4. REPLACE TELEPHONE MICROPHONE ASSEMBLY
(a) Replace the telephone microphone assembly Removal.
NOTICE:
The connector of the telephone microphone assembly is too small to be inspected. Therefore, after replacing the telephone microphone assembly, inspect it using the connector of the roof console box assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE ROOF CONSOLE BOX ASSEMBLY Removal
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table