Removal

AUDIO / VISUAL: MULTI-MEDIA INTERFACE ECU: REMOVAL

1. PRECAUTION

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal

4. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal

5. REMOVE SIDE INSTRUMENT PANEL LH Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

8. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal

9. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY

(a) Remove the 2 nuts.





(b) Disengage the clamp.

(c) Disconnect each connector and remove the multi-media interface ECU assembly.