U0001

2AZ-FXE ENGINE CONTROL: SFI SYSTEM: U0001: High Speed CAN Communication Circuit
U0001 - High Speed CAN Communication Circuit

MONITOR DESCRIPTION

The Controller Area Network (CAN) is a serial data communication system for real-time application. It is a multiplex communication system designed for on-vehicle use that provides a superior communication speed of 500 kbps and a capability to detect malfunctions.

If the hybrid vehicle control ECU cannot receive signals from any of other ECUs due to a communication error, the hybrid vehicle control ECU illuminates the MIL and stores a DTC.





MONITOR STRATEGY





TYPICAL ENABLING CONDITIONS





TYPICAL MALFUNCTION THRESHOLDS





CONFIRMATION DRIVING PATTERN

1. Connect the Techstream to the DLC3.

2. Turn the power switch on (IG) and turn the Techstream on.

3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure) Reading and Clearing Diagnostic Trouble Codes.

4. Turn the power switch off and wait for at least 30 seconds.

5. Turn the power switch on (IG) and turn the Techstream on.

6. Wait 5 seconds or more [A].

7. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

8. Read the DTC [B].

HINT
* If a DTC is output, the system is malfunctioning.
* If a DTC is not output, perform the following procedure.

9. Enter the following menus: Powertrain / Engine and ECT / Utility / All Readiness.

10. Input the DTC: U0001.

11. Check the DTC judgment result.





HINT
* If the judgment result shows NORMAL, the system is normal.
* If the judgment result shows ABNORMAL, the system has a malfunction.

12. If the judgment result is INCOMPLETE or N/A and no pending DTC is output, perform a universal trip and check for permanent DTCs Reading and Clearing Diagnostic Trouble Codes.

HINT
* If a permanent DTC is output, the system is malfunctioning.
* If no permanent DTC is output, the system is normal.

INSPECTION PROCEDURE

Refer to the CAN Communication System How to Proceed With Troubleshooting.