Removal

CRUISE CONTROL: LANE RECOGNITION CAMERA SENSOR: REMOVAL

1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Automatic High Beam System) Removal

2. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Automatic High Beam System) Removal

3. REMOVE RAIN SENSOR COVER (w/ Rain Sensor) Removal

4. REMOVE FRONT ROOF TOP GARNISH Removal

5. REMOVE MAP LIGHT ASSEMBLY Removal

6. REMOVE LANE RECOGNITION CAMERA SENSOR ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 3 bolts.

(c) Using a moulding remover, disengage the clip and remove the lane recognition camera sensor assembly.

NOTICE:
Do not touch the lens of the camera sensor during removal.