Installation

SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION

1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

(a) Engage the guide to temporarily install the front shoulder belt anchor adjuster assembly with the 2 bolts.





(b) Fully tighten the bolt [A] first, then the bolt [B] to install the front shoulder belt anchor adjuster assembly.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY

(a) Temporarily install the front seat outer belt assembly with the 2 bolts.





(b) Fully tighten the bolt [A] first, then the bolt [B] to install the front seat outer belt assembly.


Bolt A - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)


Bolt B - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

(c) Connect the pretensioner connector and lock the locking button as shown in the illustration.

Text in Illustration





NOTICE:
Securely lock the locking button.

(d) Connect the 2 connectors.

(e) Connect the shoulder anchor of the front seat outer belt assembly with the nut.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

3. INSTALL CENTER PILLAR GARNISH Installation

4. INSTALL LOWER CENTER PILLAR GARNISH Installation

5. CONNECT FRONT SEAT OUTER BELT ASSEMBLY

(a) Install the floor end of the front seat outer belt assembly with the bolt.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

(b) Check if the ELR locks.

NOTICE:
The check should be performed with the outer belt assembly installed.

(1) With the belt assembly installed, check that the belt locks when it is pulled out quickly.

6. INSTALL LAP BELT OUTER ANCHOR COVER

(a) Engage the 3 claws to install the lap belt outer anchor cover.

7. INSTALL REAR DOOR SCUFF PLATE Installation

8. INSTALL FRONT DOOR SCUFF PLATE Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation

11. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.