Steering Column Assembly (for Manual Tilt and Manual Telescopic Steering Column)

STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column): INSPECTION

1. INSPECT PRELOAD

(a) Secure the steering column assembly in a vise.





Text in Illustration





NOTICE:
When using a vise, do not overtighten it.

(b) Install a service nut to the steering main shaft.

Recommended Service Nut:





(c) Install the steering wheel assembly set nut to the steering main shaft.

(d) Lock the steering wheel assembly set nut using the service nut.

(e) Using a torque wrench, turn the main shaft and measure the preload.

Preload - Torque : 0.91 to 1.45 Nm (10 to 14 kgf-cm, 8 to 12 in-lbf)

If the preload is not as specified, replace the steering column assembly with a new one.

2. INSPECT BUSHING

(a) Check that the 2 bushings are securely installed to the steering column assembly.





Text in Illustration





If the bushings are missing or damaged, replace the steering column assembly with a new one.