Installation

FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM: INSTALLATION

1. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH

HINT
Refer to the procedure from Temporarily Tighten Front No. 1 Lower Suspension Arm Sub-assembly LH Installation.

2. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

(a) Temporarily install the front No. 1 lower suspension arm sub-assembly RH to the front suspension crossmember with the 2 bolts and nut.





NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

3. CONNECT FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

(a) Connect the front No. 1 lower suspension arm sub-assembly RH to the front lower ball joint with the bolt and 2 nuts.

Torque : 92 Nm (938 kgf-cm, 68 ft-lbf)





4. INSTALL FRONT WHEELS

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

5. STABILIZE SUSPENSION

(a) Lower the vehicle.

(b) Press down on the vehicle several times to stabilize the suspension.

6. FULLY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

(a) Fully tighten bolts A and B.





Bolt A - Torque : 233 Nm (2376 kgf-cm, 172 ft-lbf)

Bolt B - Torque : 214 Nm (2182 kgf-cm, 158 ft-lbf)

NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

(a) Inspect and adjust the front wheel alignment Front Wheel Alignment.