Removal

INTERIOR PANELS / TRIM: REAR SUNSHADE ASSEMBLY: REMOVAL

1. PRECAUTION (w/ Navigation System)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

5. REMOVE REAR SEAT CUSHION LOCK HOOK Removal

6. REMOVE REAR SEAT HEADREST ASSEMBLY LH Removal

7. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY Removal

8. REMOVE REAR SEAT HEADREST ASSEMBLY RH Removal

9. REMOVE REAR SEATBACK ASSEMBLY Removal

10. REMOVE REAR DOOR SCUFF PLATE LH Removal

11. REMOVE REAR DOOR SCUFF PLATE RH Removal

12. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH Removal

13. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH Removal

14. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

15. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH Removal

16. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Removal

17. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Removal

18. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH Removal

19. REMOVE REAR SEAT SHOULDER BELT COVER Removal

20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Disengage the 3 clips and raise the front portion of the package tray trim panel assembly.

(b) Pass the 3 rear seat belt floor anchors through the holes in the package tray trim panel assembly and remove the package tray trim panel assembly.

21. REMOVE CENTER STOP LIGHT SET Removal

22. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Disengage the 3 clips and 5 guides, and remove the No. 2 package tray trim panel assembly.

23. REMOVE REAR WINDOW SHADE ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 4 bolts [A].

(c) Loosen the bolt [B] and remove the rear window shade assembly.

NOTICE:
Bolt [B] cannot be removed from the rear window shade assembly.

24. REMOVE REAR SUNSHADE RELAY

NOTICE:
When disassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

(a) Remove the 2 screws and disconnect the link.

(b) Remove the 8 screws and remove the rear sunshade relay cover.

(d) Remove the 2 screws and rear sunshade relay.