Component Tests and General Diagnostics

LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: INSPECTION

1. INSPECT TURN SIGNAL FLASHER ASSEMBLY

(a) Disconnect the J30 connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





If the result is not as specified, there is a malfunction on the wire harness side.

(c) Reconnect the connector.

(d) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





If the result is not as specified, the flasher assembly may have a malfunction.