Removal

4GR-FSE STARTING: STARTER: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH

HINT
Removal.

4. REMOVE STARTER ASSEMBLY

(a) Disconnect the terminal 50 connector from the starter assembly.





(b) Detach the terminal cap.

(c) Remove the nut and disconnect the wire harness from terminal 30.

(d) Remove the 2 bolts and starter.