Installation

2GR-FSE LUBRICATION: OIL PRESSURE SWITCH: INSTALLATION

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Apply adhesive to 2 or 3 threads of the oil pressure switch.





Text in Illustration





Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

(b) Using a 24 mm deep socket wrench, install the oil pressure switch.





Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

NOTICE:
Do not start the engine for at least 1 hour after installation.

(c) Connect the oil pressure switch assembly connector.

2. INSPECT FOR OIL LEAK

(a) Start the engine.

(b) Check for engine oil leaks from the oil pressure switch assembly.

3. CHECK ENGINE OIL LEVEL Testing and Inspection

4. INSTALL INLET NO. 1 AIR CLEANER Installation

5. INSTALL COOL AIR INTAKE DUCT SEAL Installation