Installation

2GR-FSE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION

1. INSTALL FUEL SENDER GAUGE ASSEMBLY

(a) Install the fuel sender gauge with the 5 bolts to the fuel tank.





Torque : 1.5 Nm (15 kgf-cm, 13 in-lbf)

(b) Connect the fuel sender gauge connector.





2. INSTALL FUEL SENDER GAUGE

(a) Set the fuel sender gauge to the No. 1 fuel sub-tank. Then slide the sender gauge downward to install it.





Text in Illustration





(b) Connect the fuel sender gauge connector.

3. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. INSPECT FOR FUEL LEAK Fuel System

6. INSTALL REAR FLOOR SERVICE HOLE COVER

(a) Install the service hole cover with new butyl tape.





7. INSTALL NO. 2 REAR FLOOR SERVICE HOLE COVER Installation

8. INSTALL REAR SEAT CUSHION ASSEMBLY RH Installation

9. INSTALL REAR SEAT CUSHION ASSEMBLY LH Installation