Installation

EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Connect the 2 fog light connectors.

(b) w/ Intuitive Parking Assist system:

(1) Connect the ultrasonic sensor connector.

(c) w/ headlight cleaner system:

(1) Connect the headlight cleaner hose to the windshield washer jar and pump assembly.

(d) Engage the 10 claws and install the front bumper assembly.





(e) Install the 2 clips and screw.





(f) Install the 8 screws.





(g) Install the screw.





HINT
Use the same procedure for the RH side and LH side.

(h) Install the 2 pin hold clips.





HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE PROTECTOR

(a) Install the 2 radiator grille protectors.





3. INSTALL COOL AIR INTAKE DUCT SEAL

(a) Install the cool air intake duct seal with the 9 clips.





4. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

5. VEHICLE PREPARATION FOR FOG LIGHT AIMING Adjustments

6. PREPARATION FOR FOG LIGHT AIMING Adjustments

7. INSPECT FOG LIGHT AIMING Adjustments

8. ADJUST FOG LIGHT AIMING Adjustments