Installation

METER / GAUGE / DISPLAY: CLOCK: INSTALLATION

1. INSTALL CLOCK SUB-ASSEMBLY (w/o Multi-display)

(a) Connect the connector.

(b) Install the cover with the 9 screws.

(d) Install the panel with the 6 screws.

2. INSTALL RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

3. INSTALL NO. 2 RADIO BRACKET (w/o Multi-display) Installation

4. INSTALL NO. 1 RADIO BRACKET (w/o Multi-display) Installation

5. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

6. INSTALL CLOCK ASSEMBLY (w/ Multi-display)

(a) for DVD:

(1) Check that the wire harness is in the position shown in the illustration.

(2) Engage the 2 clips and install the clock assembly.

(b) for HDD:

(1) Check that the wire harness is in the position shown in the illustration.

Text in Illustration

(2) Engage the 2 clips and install the clock assembly.

(3) Check that the wire harness is in the position shown in the illustration.

7. INSTALL RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

8. INSTALL NO. 2 RADIO BRACKET (w/ Multi-display) Installation

9. INSTALL NO. 1 RADIO BRACKET (w/ Multi-display) Installation

10. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

11. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

12. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

13. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

14. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Installation

15. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation

16. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

17. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

18. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

20. ADJUST CLOCK