Component Tests and General Diagnostics

SEAT BELT: SEAT BELT WARNING SYSTEM: ON-VEHICLE INSPECTION

1. INSPECT DRIVER SIDE SEAT BELT WARNING

(a) Turn the engine switch on (IG).

(b) When the driver seat belt is not fastened, check that the driver seat belt warning light on the combination meter blinks.

(c) When the driver seat belt is fastened, check that the driver seat belt warning light on the combination meter is off.

2. INSPECT PASSENGER SIDE SEAT BELT WARNING (w/ Multi-display)

(a) Turn the engine switch on (IG).

(b) When the front passenger seat belt is not fastened with the passenger seat occupied, check that the front passenger seat belt warning light on the multi-media module display blinks.

(c) When the front passenger seat belt is fastened with the passenger seat occupied, check that the front passenger seat belt warning light on the multi-media module display is off.

3. INSPECT PASSENGER SIDE SEAT BELT WARNING (w/o Multi-display)

(a) Turn the engine switch on (IG).

(b) When the front passenger seat belt is not fastened with the passenger seat occupied, check that the front passenger seat belt warning light on the integration control and panel assembly blinks.

(c) When the front passenger seat belt is fastened with the passenger seat occupied, check that the front passenger seat belt warning light on the integration control and panel assembly is off.

4. INSPECT SEAT BELT WARNING BUZZER

HINT
If the buzzer does not sound, the buzzer cancel setting may be set to ON.

(a) Turn the engine switch on (IG).

(b) When the vehicle is driven at approximately 20 km/h (13 mph) or more while the driver or front passenger seat belt is not being fastened, check that the buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 9.6 seconds*1 or 30 seconds*2.

(c) Check that the buzzer sounds at an interval of 0.4 seconds for 20 seconds*1 or 90 seconds*2.

(d) Check that the buzzer stops 29.6 seconds*1 or 2 minutes*2 after the buzzer starts sounding.

(e) After the buzzer has stopped, turn the engine switch off and then start the engine again. Drive the vehicle at approximately 20 km/h (13 mph) or more while the driver or front passenger seat belt is not being fastened, and then check that the buzzer sounds again.

(f) After the buzzer has stopped, fasten the driver and front passenger seat belts. Drive the vehicle at approximately 20 km/h (13 mph) or more and unfasten the driver or front passenger seat belt, and then check that the buzzer sounds again.

(g) After the buzzer has stopped, move the shift lever to R, and then move it to D. Drive the vehicle at approximately 20 km/h (13 mph) or more, and then check that the buzzer sounds again.

* *1: w/ Occupant Classification System

* *2: w/o Occupant Classification System