Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND ACCELERATION SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE CONSOLE BOX

HINT
Refer to the instructions for Removal of the console box Removal.

3. REMOVE NO. 2 CONSOLE BOX DUCT Removal

4. REMOVE YAW RATE AND ACCELERATION SENSOR

(a) Separate the 2 wire harness clamps.





(b) Remove the 2 bolts and yaw rate and acceleration sensor.

(c) Disconnect the yaw rate and acceleration sensor connector.





NOTICE:
Do not remove the sensor from the bracket.