Fuel Gauge Sender: Testing and Inspection

2UR-GSE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION

1. INSPECT FUEL SENDER GAUGE ASSEMBLY

(a) Disconnect the fuel sender gauge connector.





(b) Inspect the fuel sender gauge assembly.

(1) Remove the fuel sender gauge assembly.

(2) Check that the float moves smoothly between F and E.

(3) Measure the resistance between terminals 2 (S) and 1 (FE) of the connector according to the value(s) in the table below.

Standard Resistance:





HINT
If the value is not as specified, replace the fuel sender gauge assembly LH.

2. INSPECT FUEL SENDER GAUGE

(a) Disconnect the fuel sender gauge connector.





(b) Inspect the fuel sender gauge assembly.

(1) Remove the fuel sender gauge assembly.

(2) Check that the float moves smoothly between F and E.

(3) Measure the resistance between terminals 1 (FS) and 2 (E) according to the value(s) in the table below.

Standard Resistance:





HINT
If the result is not as specified, replace the fuel sender gauge assembly RH.