Installation

AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: INSTALLATION

1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, install a new rear No. 1 differential mount cushion.





SST : 09570-24011

NOTICE:
* Be sure to use the correct combination of SST.
* Apply a small amount of grease to the threads of SST before use.
* Temporarily install the rear No. 1 differential mount cushion to the rear suspension member in order to prevent it from tilting and install SST.
* Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.
* Do not slant the bolts of SST.
* Tighten the 2 bolts of SST equally into the 2 holes of the rear No. 1 differential mount cushion.

2. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, install a new rear No. 2 differential mount cushion.





SST : 09570-24011

NOTICE:
* Be sure to use the correct combination of SST.
* Apply a small amount of grease to the threads of SST before use.
* Temporarily install the rear No. 2 differential mount cushion to the rear suspension member in order to prevent it from tilting and install SST.
* Make sure that SST contacts the entire circumference of the rear No. 2 differential mount cushion.
* Do not slant the bolts of SST.

3. INSTALL REAR SUSPENSION MEMBER

HINT
Refer to the procedure from Install Rear Suspension Member Installation.