Removal

INTERIOR: REAR CONSOLE BOX: REMOVAL

1. REMOVE LOWER REAR SEAT CONSOLE BOX COVER





(a) Using a screwdriver, detach the 4 claws, then detach the 2 hooks and remove the lower rear seat console box cover.

HINT
Tape the screwdriver tip before use.

2. REMOVE REAR SEAT CONSOLE BOX ASSEMBLY





(a) Using a screwdriver, detach the 4 clips and remove the rear seat front console box panel.

HINT
Tape the screwdriver tip before use.





(b) Remove the 4 bolt and service plug cover.





(c) Remove the 2 bolts, and move the rear seat console box in the direction of the arrow shown in the illustration. Then detach the 2 clips, and remove the rear seat console box.





(d) Disconnect the connector.

3. REMOVE REAR SEAT CONSOLE ARMREST GARNISH LH





(a) Open the console door.

(b) While pulling up the rear seat console armrest garnish, detach the 3 claws and 2 clips to remove it.

4. REMOVE REAR SEAT CONSOLE ARMREST GARNISH RH

HINT
Use the same procedures described for the LH side.

5. REMOVE REAR SEAT CONSOLE PANEL ASSEMBLY





(a) Using a screwdriver, detach the 6 clips.

HINT
Tape the screwdriver tip before use.

(b) Disconnect the connector and then remove the rear seat console panel.

6. REMOVE REAR POWER SEAT SWITCH





(a) Remove the 4 screws and rear power seat switch.

7. REMOVE FRONT REAR SEAT CONSOLE TABLE COVER





(a) Using a screwdriver, detach the 2 claws.

HINT
Tape the screwdriver tip before use.

(b) Pull up the front rear seat console table cover and detach the 2 hooks to remove it.

8. REMOVE REAR SEAT CONSOLE TABLE ASSEMBLY





(a) Remove the 2 bolts, 2 nuts and rear seat console table.

9. REMOVE REAR SEAT CONSOLE ARMREST COVER





(a) Take out the rear seat console armrest cover.

10. REMOVE REAR SEAT CONSOLE ARMREST ASSEMBLY





(a) Remove the 8 nuts and 2 bolts.

(b) Remove the 2 screws.

(c) Disconnect the connector and then remove the rear seat console armrest.