Installation

L110F HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION

1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Install the floor shift with the 4 bolts.





Torque : 8.3 Nm (85 kgf-cm, 74 in-lbf)

(b) Connect the 6 wire harness clamps to the floor shift.

(c) Connect the 2 connectors.

2. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Temporarily connect the shifting rod to the connecting rod swivel with the nut.





HINT
The nut will be tightened to a specified torque during the shift lever position adjustment procedure.

3. INSTALL NO. 1 CONSOLE BOX DUCT

(a) Install the duct with the 2 screws.

4. INSTALL CONSOLE BOX ASSEMBLY

(a) w/ Rear Seat Entertainment System:

Install the console box Installation.

(b) w/o Rear Seat Entertainment System:

Install the console box Installation.

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. ADJUST SHIFT LEVER POSITION Adjustments

7. INSPECT SHIFT LEVER POSITION Adjustments

8. INSTALL BATTERY SERVICE HOLE COVER LH Installation

9. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation