Removal

L110F HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal

3. REMOVE BATTERY SERVICE HOLE COVER LH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* After turning the power switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE CONSOLE BOX ASSEMBLY

(a) w/ Rear Seat Entertainment System:

Remove the console box Removal.

(b) w/o Rear Seat Entertainment System:

Remove the console box Removal.

6. REMOVE NO. 1 CONSOLE BOX DUCT

(a) Remove the 2 screws and pull out the duct.

7. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Move the shift lever to the N position.





(b) Remove the nut and disconnect the shifting rod from the connecting rod swivel.

8. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Disconnect the 2 connectors.





(b) Disconnect the 6 wire harness clamps from the floor shift.

(c) Remove the 4 bolts and floor shift.