Removal

INTERIOR: REAR DOOR SUNSHADE ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal

3. REMOVE BATTERY SERVICE HOLE COVER LH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is) reconnected Repair Instruction - Initialization.

5. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH Removal

6. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH Removal

7. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH Removal

8. REMOVE REAR DOOR TRIM COVER LH Removal

9. REMOVE REAR DOOR FRAME GARNISH LH Removal

10. REMOVE REAR NO. 2 DOOR FRAME GARNISH LH Removal

11. REMOVE REAR CURTAIN SUB-ASSEMBLY LH





(a) Remove the 10 screws.

(b) Detach the 4 clips, disconnect the connector and remove the curtain.