Test G

PINPOINT TEST G: THE RF POWER WINDOW IS INOPERATIVE

Test G1:

Test G2:

Normal Operation
Under normal operation when the front window control switch is operated in the UP position the RF front motor receives power through circuit 313 (WH/YE) and ground through circuit 314 (TN/LB). When the front window control switch is operated in the DOWN position the RF front motor receives power through circuit 314 (TN/LB) and ground through circuit 313 (WH/YE).

Possible Causes
- Inoperative RF power window motor.
- Inoperative front window control switch.
- Open in circuit 313 (WH/YE) or circuit 314 (TN/LB).