B1319 - Drivers Door Ajar Short To Ground During Self Test
DTC B1319: Drivers Door Ajar Short To Ground During Self TestB1319-1 - Check DTCs
- Perform on-demand self test for lighting control module.
Is DTC B1322 or B1566 retrieved?
YES REFER to Courtesy Lamp testing. Testing and Inspection
NO GO to B1319-2.
B1319-2 - Ensure Driver's Door Is Closed.
- Verify all doors are fully closed to second latch.
- Rerun self test.
Is DTC B1319 still present?
YES GO to B1319-3.
NO System operating normally.
B1319-3 - Test Circuit
- Remove connector C2 from driver door module.
- Ensure that all doors are closed.
- Carefully probe pin C2-9 on driver door module for continuity with ground.
Is there continuity?
YES GO to B1319-4.
NO REPLACE driver door module. RETEST system.
B1319-4 - Test Lighting Control Module
- Disconnect lighting control module.
- Carefully probe pin C2-9 on lighting control module for continuity with ground.
Is there continuity?
YES SERVICE circuit 344 (BK/Y) for short to ground. RETEST system.
NO REPLACE lighting control module. RETEST system.