Stability Assist Diagnostic Trouble Codes (DTCs) Index

Note: The need to re-calibrate the stability assist module is indicated by the active/fail lamp flashing. There are other service actions that may require re-calibration where there is no flashing lamp. Refer to the Stability Assist Module Calibration List. The lamp will flash after the clearing of DTC's that are indicated on the stability assist calibration list.

Note: Stability assist may be referred to as interactive vehicle dynamics (IVD) in the NGS Tester.

Note: DTC C1730 (Reference Voltage Out Of Range) must be repaired before DTC C1279, C1280, C1281, C1282, C1288, C1289.

B1255-B1257:

Part 1 of 7

B1342-B2477 / C1095-C1730:

Part 2 of 7

C1805-C1969 / P0112-P0707:

Part 3 of 7

P0708-P1184 / U1009-U1262:

Part 4 of 7

5 Of 7:

Part 5 of 7

6 Of 7:

Part 6 of 7

7 Of 7:

Part 7 of 7