Test V

PINPOINT TEST V: THE WASHER PUMP IS INOPERATIVE

Test V1:

Test V2-V4:

Test V5-V8:

Normal Operation
The multifunction switch sends a reference signal through circuit 8-KA7 (WH/VT) to the wiper motor module (internal), the wiper motor will in turn send battery voltage through circuit 75S-KA7 (YE/VT) to activate the washer pump motor.

Possible Causes
- circuit 8-KA7 (WH/VT) open
- circuit 31-KA7 (BK) open
- circuit 31-KA19 (BK/RD) open
- circuit 75S-KA7 (YE/VT) open
- wiper motor
- multifunction switch
- washer pump motor