Test E: The Memory Mirror Is Inoperative - Memory Set Switch LED

PINPOINT TEST E: THE MEMORY MIRROR IS INOPERATIVE - MEMORY SET SWITCH LED

E1-E2:

E2-E5:

E5-E8:

Normal Operation
The driver door module (DDM) sends vehicle power (VPWR) to the memory set switch LED on circuit 7S-AH27 (YE) whenever the SET or memory buttons 1 or 2 are pressed. The memory set switch LED is grounded at all times by circuit 31-AH27 (BK). When the DDM sends VPWR to the memory set switch LED, it illuminates.

Possible Causes
- circuits 7S-AH27 (YE) open, short to ground or voltage
- memory set switch
- DDM