Test G: The Roof Opening Panel Does Not Open or Close In Vent Position

PINPOINT TEST G: THE ROOF OPENING PANEL DOES NOT OPEN OR CLOSE IN VENT POSITION

G1-G4:

G4-G5:

Normal Operation
The roof opening panel motor is energized by voltage on circuit 30-AG12 (RD/GN). The roof opening panel motor is grounded through circuit 31-AG12 (BK/GN). When the roof opening panel control switch is pressed, it connects circuit 32-AG12 (WH/GN) to circuit 9-AG7 (BR/RD) for tilt up. When the roof opening panel control switch is slid to the close position and released it connects circuit 33-AG10 (YE/BU) to circuit 9-AG7 (BN/RD) for close.

Possible Causes
- circuit 32-AG12 (WH/GN) short to ground or open
- circuit 33-AG10 (YE/BU) short to ground or open
- roof opening panel lifter assemblies
- roof opening panel adjustment
- roof opening panel motor
- roof opening panel control switch