Test F: The Global Open/Close Feature Does Not Operate Correctly

PINPOINT TEST F: THE GLOBAL OPEN/CLOSE FEATURE DOES NOT OPERATE CORRECTLY

F1-F2:

Normal Operation
The LH and RH front window motors are energized by voltage on circuits 30-AJ80 (RD) and 31-AJ71 (RD/YE). The LH and RH front window motors are grounded through circuits 31-AJ80 (BK/OG) and 31-AJ71 (BK/YE). When the global open/close feature is activated the DDM sends a signal via circuit 8-AJ43 (GY/VT) to the LH and RH front window motors. The global open/close feature does not function when the delayed accessory is active. The roof opening panel performs global open/close with the windows (if equipped). A failure in the central locking system could cause the global open/close feature to be inoperative.

Possible Causes
- circuit 8-AJ43 (WH/BU) open
- circuit 8-AJ43A (WH/BU) open
- circuit 8-AJ43B (WH/BU) open
- DDM
- driver door lock cylinder switch