Test G: The Roof Opening Panel Does Not Open Or Close In Vent Position

PINPOINT TEST G: THE ROOF OPENING PANEL DOES NOT OPEN OR CLOSE IN VENT POSITION

G1:

G2-G4:

G5:

Normal Operation
The roof opening panel motor is supplied voltage by the rear battery junction box (BJB). When the roof opening panel control switch is pressed it connects circuit 32-AG12 (WH/GN) for tilt up. When the roof opening panel control switch is moved to the close position and released it connects circuit 33-AG10 (YE/BU) for close.

Possible Causes
- circuit 32-AG12 (WH/GN) short to ground or open
- circuit 33-AG10 (YE/BU) short to ground or open
- roof opening panel adjustment
- roof opening panel control switch
- roof opening panel lifter assemblies
- roof opening panel motor