Pinpoint Tests AN: The Memory Feedback Warning Chime Is Inoperative

Instrumentation, Message Center and Warning Chimes

Pinpoint Tests

Pinpoint Test AN: The Memory Feedback Warning Chime Is Inoperative

Normal Operation

The Instrument Panel Cluster (IPC) receives the memory feedback chime request from the Driver Seat Module (DSM) over the Medium Speed Controller Area Network (MS-CAN) communication bus. When a successful memory set procedure is carried out, the DSM sends a chime request to the IPC to sound the memory feedback chime.

This pinpoint test is intended to diagnose the following:

- DSM
- IPC



PINPOINT TEST AN: THE MEMORY FEEDBACK WARNING CHIME IS INOPERATIVE

-------------------------------------------------
AN1 CHECK THE KEY-IN-IGNITION WARNING CHIME OPERATION


- Ignition OFF.
- On vehicles without Intelligent Access (IA), insert the key into the ignition lock cylinder.
- On vehicles equipped with IA, place the ignition in the ACC mode.
- Open the LH front door and observe the key-in-ignition warning chime operation.
- Does the key-in-ignition warning chime operate correctly?

Yes
GO to AN2.

No
Go To Pinpoint Test AH. Pinpoint Tests AH: The Key-In-Ignition Warning Chime Is Inoperative

-------------------------------------------------
AN2 CHECK THE MEMORY SET FEATURE


- Verify that the memory set procedure can successfully change the memory preferences.
- Does the memory set procedure successfully change the memory preferences?

Yes
GO to AN3.

No
REFER to Seats.

-------------------------------------------------
AN3 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST


- Check for recorded DTCs from the IPC self-test.
- Is DTC U0208:00 recorded?

Yes
Go To Pinpoint Test AY. Pinpoint Tests AY: DTC U0208:00

No
INSTALL a new DSM. TEST the system for normal operation.

-------------------------------------------------