Selector Lever Bezel

Selector Lever Bezel









Removal

1. Remove the selector lever knob. For additional information, refer to Selector Lever Knob Selector Lever Knob removal and installation.

2. Remove the center console trim.





3. Remove the cup holder lid trim panel.





4. Remove the cup holder retaining screws and remove the cup holder.





5. Slide the selector lever bezel back and lift to access the electrical connectors.





6. Disconnect the selector lever bezel electrical connectors and remove the selector lever bezel.





Installation

1. Position the selector lever bezel on the selector lever and connect the selector lever electrical connectors.





2. Position the selector lever bezel in place.





3. Position the cup holder in place. Install the cup holder retaining bolts.
- Tighten to 3 Nm (27 lb-in).





4. Position the cup holder trim cover in place and install.





5. Position the center counsel trim in place and install.





6. Install the selector lever knob. For additional information, refer to Selector Lever Knob Selector Lever Knob removal and installation.