Anti-Theft - Passive Anti-Theft System (PATS) - Transceiver

Passive Anti-Theft System (PATS) Transceiver









Removal and Installation

1. Pulling firmly rearward, remove the RH instrument panel finish applique.

2. Remove the 2 bolts and the steering column opening trim panel.

3. Pulling firmly in a rearward direction, remove the ignition lock cylinder bezel.

4. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.

5. Using a suitable tool (such as a dentist pick), release the tabs and remove the PATS transceiver.

6. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Panel Cluster (IPC) again.

To install, reverse the removal procedure.