Selector Lever Bezel

Selector Lever Bezel









Removal

1. Remove the selector lever knob. For additional information, refer to Selector Lever Knob Selector Lever Knob.

2. Remove the center console trim.





3. Remove the cup holder lid trim panel.





4. Remove the cup holder retaining screws and position the cupholder out of the center console to access the electrical connector.





5. Disconnect the cupholder electrical connector and remove the cupholder.





6. Place the selector lever in M. Slide the selector lever bezel back and lift to access the electrical connectors.





7. Disconnect the 4 electrical connectors and remove the selector lever bezel from the center console.





8. Release the 7 tabs and remove the selector lever boot from the selector lever bezel.





9. Release the 6 tabs and remove the selector lever boot bezel from the selector lever bezel.





Installation

1. Install the selector lever boot bezel in the selector lever bezel. Check to make sure the 6 tabs are correctly installed.





2. Install the selector lever boot in the selector lever bezel. Check to make sure the 7 tabs are correctly installed.





3. Connect the 4 electrical connectors and position the selector lever bezel over the selector lever, on the center console.





4. Push forward on the selector lever bezel and install it in the center console.





5. Connect the cupholder electrical connector and position the cupholder in place.





6. Position the cup holder in place and install the 4 screws.





7. Position the cup holder trim cover in place and install.





8. Position the center counsel trim in place and install.





9. Install the selector lever knob. For additional information, refer to Selector Lever Knob Selector Lever Knob.