Shift Interlock Solenoid: Service and Repair

Brake Shift Interlock Actuator









Removal and Installation

1. Disconnect the battery ground cable. Wait at least one minute before proceeding with the procedure to allow the backup power supply to deplete its energy. For additional information, refer to Battery Disconnect in Battery.

2. Remove the steering column clockspring. For additional information, refer to Clockspring in Restraint Systems.

3. Remove the 3 clockspring mounting bracket bolts and remove the clockspring mounting bracket from the steering column.
- To install, tighten to 8 Nm (71 lb-in).





4. Release the clip retaining the Brake Shift Interlock Actuator (BSIA) and slide the BSIA down.





5. Remove the park position switch from the cavity and remove the BSIA assembly.





6. To install the BSIA, reverse the removal procedure.