Camshaft Roller Follower

Camshaft Roller Follower





Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the valve covers. For additional information, refer to Valve Cover - RH Valve Cover - RH or Valve Cover - LH Valve Cover - LH.

3. Position the piston of the cylinder being repaired at the bottom of the stroke.

4. Install the Valve Spring Compressor Spacer between the valve spring coils to prevent valve stem seal damage.





5. Use the Valve Spring Compressor to compress the valve springs and remove the cam roller followers.





Installation

1. Use the Valve Spring Compressor to compress the valve spring and install the camshaft roller followers.





2. Remove the Valve Spring Compressor Spacer from between the valve spring.





3. Install the valve covers. For additional information, refer to Valve Cover - RH Valve Cover - RH or Valve Cover - LH Valve Cover - LH.