Engine Mount - LH

Engine Mount - LH

















Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the generator. For additional information, refer to Charging System Service and Repair.

3. Install the Engine Lifting Bracket.





4. Install the Engine Support Bar.





5. Remove the oil filter and discard.
- Lubricate the new oil filter O-ring seal with clean engine oil prior to installation.

6. Remove the LH and RH lower engine mount nuts.
- To install, tighten to 90 Nm (66 lb-ft).

7. Using the Engine Support Bar, raise the engine.





8. Remove the 3 bolts and the LH engine mount.
- To install, tighten to 70 Nm (52 lb-ft).

9. To install, reverse the removal procedure.