EGR Tube: Service and Repair

Exhaust Gas Recirculation (EGR) System Module Tube

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the 2 bolts and the intake manifold shield.
- To install, tighten to 12 Nm (106 lb-in).

3. Disconnect the EGR system module tube-to-EGR system module fitting.
- To install, tighten to 43 Nm (32 lb-ft).

4. Disconnect the EGR system module tube-to-exhaust manifold fitting.
- To install, tighten to 43 Nm (32 lb-ft).

5. Remove the EGR system module tube from the vehicle.

6. To install, reverse the removal procedure.