Flow Chart No. 3: All Door Locks Operate From One Switch Only
Flow Chart No. 3 - Symptom - All locks work from one switch only.Step 1
Check suspect door lock switch.
1. Remove suspect door lock switch.
2. Perform power door lock switch inspection.
2. Did switch test OK?
Step 2
Check supply to switch.
1. Check B/W circuit for LH or RH switch voltage.
2. Is there battery voltage?
Step 3
Check P/Y circuit.
1. Remove opposite door lock switch, then, using an ohmmeter check P/W circuit from left-hand door lock switch connector to P/W circuit at right-hand door lock switch connector for continuity.
2. Is there continuity?
Step 4
Check P/LG circuit.
1. Using an ohmmeter, check P/LG circuit from left-hand door lock switch connector to P/LG circuit at right-hand door lock switch connector for continuity.
2. Is there continuity?