B2691

Step 1:

Step 2-Step 4:

Step 5:

Step 6-Step 7:

Step 8:

PINPOINT TEST 13: DTC B2691 - SEAT BELT BUCKLE SWITCH CIRCUIT FAULT, FRONT DRIVER'S SIDE

Normal Operation
The restraints control module (RCM) checks the safety belt buckle switch circuits for faults. If the RCM detects an open circuit or short to voltage fault, it will store diagnostic trouble code (DTC) B2691 in memory and illuminate the air bag indicator.

Possible Causes
A driver safety belt buckle switch open circuit or short to voltage fault can be caused by:
- damaged wiring, terminals or connectors.
- a faulty driver safety belt buckle switch.
- a faulted RCM.

NOTE: Most faults are due to connector and/or wiring concerns. Carry out a thorough Inspection and Verification before proceeding with the Pinpoint Test.