B2692

Step 1:

Step 2-Step 4:

Step 5-Step 6:

Step 7-Step 8:

PINPOINT TEST 14: DTC B2692 - FRONT PASSENGER'S SAFETY BELT BUCKLE SWITCH CIRCUIT FAULT

Normal Operation
The restraints control module (RCM) checks the passenger safety belt buckle switch circuits for faults. If the RCM detects an open circuit or short to voltage fault, it will store diagnostic trouble code (DTC) B2692 in memory and illuminate the air bag indicator.

Possible Causes
A passenger safety belt buckle switch open circuit or short to voltage fault can be caused by:
- damaged wiring, terminals or connectors.
- a faulty passenger safety belt buckle switch.
- RCM is faulted.

NOTE: Most faults are due to connector and/or wiring concerns Carry out a thorough Inspection and Verification before proceeding with the Pinpoint Test.