B-Pillar Trim Panel - 2 Door, Regular Cab

-
B-PILLAR TRIM PANEL - 2 DOOR, REGULAR CAB

Removal and Installation

Both B-pillar trim panels





1. Remove the door scuff plate trim panel.
1 Remove the screws.
2 Remove the scuff plate.

RH B-pillar trim panel

1. Remove the handle carrier cover.






1. Remove the jack handle carrier.
1 Remove the screws.
2 Remove the jack handle carrier.

LH B-pillar trim panel





1. Remove the package tray mat.

2. Remove the package tray.
1 Remove the screws.
2 Remove the package tray.

Both B-pillar trim panels





1.
NOTE:If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
NOTE:Safety belt guide cover removed for clarity.
Remove the front safety belt guide cover.

- Release the tabs and remove the cover.






1. Remove the bolt and safety belt guide.

- Use the safety belt bolt bit to remove the bolt.Tightening
Torque:40 Nm {4.1 kgf-m, 30 ft-lbf}






1. Disconnect the safety belt anchor.
1 Use the Safety Belt Bolt Bit to remove the bolt.
2 Disconnect the safety belt anchor.Tightening
Torque:40 Nm {4.1 kgf-m, 30 ft-lbf}






1. Reposition the B-pillar trim panel.
1 Remove the pin-type retainers.
2 Reposition the B-pillar trim panel.






1. Disconnect the radio speaker electrical connector.






1. Lower the rear of the A-pillar trim panel to remove the B-pillar trim panel.

2. Remove the B-pillar trim panel.

3. To install, reverse the removal procedure.