Climate Control Unit Inspection [Full-Auto Air Conditioner]

CLIMATE CONTROL UNIT INSPECTION [FULL-AUTO AIR CONDITIONER]

1. Remove the climate control unit. Climate Control Unit Removal/Installation [Full-Auto Air Conditioner]

2. Install the audio unit. Audio Unit Removal/Installation

3. Connect the climate control unit connector.

4. Connect the negative (-) lead of the tester to body ground.

5. Turn the ignition switch to the ON position.

6. By inserting the positive (+) lead of the tester into each climate control unit terminal, measure the voltage according to the terminal voltage table.

- If there is any malfunction, inspect the parts under "Inspection item (s)".

- If the parts under "Inspection item (s)" are found to be normal (except for terminal T), replace the climate control unit.
- For terminal T, first try replacing the power MOS FET. If there is still any malfunction, replace the climate control unit.

Terminal Voltage Table (Reference)

Terminal Voltage Table (Reference) (Part 1):

Terminal Voltage Table (Reference) (Part 2):

Terminal Voltage Table (Reference) (Part 3):

Terminal Voltage Table (Reference) (Part 4):