Programming and Relearning

PCM CONFIGURATION [L3 WITH TC]

1. Connect the M-MDS to DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select the "Module Programming".
- When using the PDS (Pocket PC)

1 Select "Programming".
2 Select "Module Programming".

3. Then, select the "Programmable Module Installation", "PCM" from the screen menu.

4. Select "PCM" and perform procedures according to directions on the M-MDS screen.

5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

- If a DTCs is detected, perform the applicable DTC inspection. DTC Table Engine