C-Pillar Trim Removal/Installation

C-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
a. Rear scuff plate inner Rear Scuff Plate Removal/Installation

b. Rear seat Rear Seat Removal/Installation

c. Sub trunk box Service and Repair

d. Trunk end trim Trunk End Trim Removal/Installation

e. Trunk side trim

2. Partially peel back the seaming welt.

3. Remove the screw.






4. Pull the C-pillar trim outward and detach clip A and pins B, C.

5. Pull the C-pillar upper trim downward and detach the tabs and clip D.

6. Remove the C-pillar trim.

7. Turn the clip installed on the body 90° in the direction indicated by the arrow in the figure and pull them out.






8. Remove clip D from the body, then install it to the C-pillar trim.

9. Install in the reverse order of removal.