Radiator Cooling Fan Motor: Testing and Inspection

FAN MOTOR INSPECTION [L3 WITH TC]

Part Inspection

1. Verify that the battery is fully charged. Testing and Inspection

2. Remove the charge air cooler duct. Service and Repair

3. Disconnect the cooling fan motor connector (2 terminals).

4. Install a tester and battery to the cooling fan motor connector (2 terminals) as shown in the figure.






5. Verify that each fan motors operate smoothly at the standard current.

- If there is any malfunction, replace the applicable part.

Cooling fan motor No.1, No.2 standard current
- 17.5-22.5 A