Selector Lever Inspection

SELECTOR LEVER INSPECTION

1. Turn the ignition switch to the ON position. (engine off)

2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.






3. Verify that the selector lever can be shifted.

4. Verify that there is a "click" at each position when shifted from P position to M range.

5. Verify that the positions of the selector lever and the indicator are aligned.






FS5A-EL
- If there is any malfunction, adjust the TR switch. Adjustments

AW6A-EL, AW6AX-EL
- If there is any malfunction, perform the neutral position learning. Programming and Relearning

6. Verify that the vehicle operates in each selected range.