B-Pillar Upper Trim Removal/Installation

B-PILLAR UPPER TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
a. Front seat belt upper anchor installation bolt Front Seat Belt Removal/Installation

b. Front scuff plate inner Front Scuff Plate Removal/Installation

c. Rear scuff plate inner Rear Scuff Plate Removal/Installation

d. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

2. Partially peel back the seaming welt.






3. Remove the screw.

4. Pull the B-pillar upper trim outward and detach clip A and locator pin B.

5. Pull the B-pillar upper trim downward and detach the tabs and clip C.

6. Remove the B-pillar upper trim.

7. Turn the clip installed on the body 90° in the direction indicated by the arrow in the figure and pull them out.






8. Remove clip C from the body, then install it to the B-pillar upper trim.

9. Install in the reverse order of removal.