Front Seat Slide Adjuster Removal/Installation

FRONT SEAT SLIDE ADJUSTER REMOVAL/INSTALLATION

WARNING:
- Handling the front seats improperly can accidentally deploy the side air bag, which may seriously injure you. Read air bag system service warnings and cautions before handling the front seats. Air Bag System Service Warnings

CAUTION:
- After removing a front seat, do not operate the slider lever. If the slider lever is operated, the left and right slide positions will deviate, and the slide adjuster may be damaged after the front seat is installed.
- Verify that there are no malfunctions in the sliding mechanism after installing a front seat.
- When performing the procedure with a front seat removed from the vehicle, perform the procedure on a clean rag so as not to damage or soil the seat.
- When the passenger's seat is removed, perform the seat weight sensor inspection using the M-MDS after installing the passenger's seat. Component Tests and General Diagnostics
- When the passenger's seat is replaced with a new one, perform the seat weight sensor calibration using the M-MDS. Programming and Relearning

1. Disconnect the negative battery cable and wait 1 min or more.

2. Remove the following parts:
a. Front seat Front Seat Removal/Installation

b. Front seat side cover Front Seat Side Cover Removal/Installation

c. Front seat front cover Front Seat Front Cover Removal/Installation

d. Front seat cushion Front Seat Cushion Trim Removal/Installation

e. Front seat back pad and trim Front Seat Back Trim Removal/Installation

3. Install in the reverse order of removal.